Products for USB Sensing and Control

Products for USB Sensing and Control

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

Inner Bracket PG30-A with set screw (8 pcs)

ID: TSL4111_0

Connect two PG30 profiles at right angles by sliding these brackets into the groove of the profile.

$5.20

Quantity Available: 305

Qty Price
5 $4.99
10 $4.78
25 $4.68
50 $4.58
100 $4.47

This bracket allows you to connect extrusions at right angles to one another. It is suitable for use with PG30 extrusions. They are not as strong as the screw or butt connectors but are fast and easy to use. A 3mm hex drive is required to tighten the set screw.
Of critical importance is that you make sure you have selected the correct type (A or B). Refer to the T-slot primer in the resources section for information on selecting the correct style.

Product Specifications

Look-up Reference
Catalogue Page 84
Manufacturer Part Number 3.41.08A
Physical Properties
T-Slot Profile Size PG30

T-Slot Profiles

This bracket connects two PG30 T-slot profiles together. Here's a list of compatible profiles:

Product Physical Properties
Image Part Number Price T-Slot Profile Size Number of Slots
TSL4002_0 $7.00/Meter PG30 4
TSL4003_0 $12.00/Meter PG30 6

Here are all of the methods for connecting PG30 profiles together:

Product Physical Properties
Image Part Number Price T-Slot Profile Size
TSL4100_0 $1.15 PG30
TSL4103_0 $0.70 PG30
TSL4104_0 $0.85 PG30
TSL4105_0 $1.25 PG30
TSL4111_0 $5.20 PG30
TSL4112_0 $5.20 PG30
TSL4116_0 $7.40 PG30
TSL4120_0 $0.50 PG30
TSL4122_0 $7.40 PG30
TSL4222_0 $0.80 PG30