Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

DC Solid State Relay - 120V 75A

ID: 3958_0

This SSR switches up to 120VDC / 75A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

$45.00

Quantity Available: 73

Qty Price
5 $43.20
10 $41.40

For high current loads, this solid state relay is the way to go. Using the digital outputs from a Phidgets device such as the OUT1100 - 4x Digital Output Phidget, you can control the relay to silently switch a DC circuit at 120V/75A or less. There's an indicator LED on the control side of the circuit so you can tell the state of the relay at a glance.

If your SSR is overheating, you should consider getting a heat sink for safety. See the Connection & Compatibility tab for a list of compatible heatsinks. This SSR comes with a heat transfer pad that can be placed between the metal base of the SSR and the surface it's mounted to in order to help encourage heat flow. It also comes with a diode that can be used to protect your SSR against back EMF.

Comes Packaged with

Accessories

This relay comes packaged with a heat transfer pad and a 10A02-T diode. Use the heat transfer pad whenever mounting the SSR on a heat sink or metal surface. Use the diode in parallel with your load in order to protect your SSR. For more information, see the Solid State Relay Guide.

Connection

This relay can be controlled using a Phidgets relay output board. See the Connection & Compatibility tab for details.

Warnings

warning
  1. If you're running the SSR close to it's maximum current rating, you'll probably need to mount it to a heat sink or a surface that can function as a heat sink.
  2. Use the heat transfer pad between the SSR and the heat sink. Failure to do so can cause overheating and could damage the relay.
  3. Make sure that the SSR terminal screws are tight. If the screws are not tight, the SSR will get damaged by heat generated when the power is ON.
  4. When an SSR fails, it most often fails permanently closed - leaving your load powered, and possibly creating a fire or safety hazard. Be sure to have failsafes in these situations.
  5. You can use a fuse to protect your circuit from wiring mistakes and accidental short-circuits.
  6. Make sure that you use the relay within the product specifications.
  7. Ensure that the relay terminals are covered or protected when switching high voltage loads.

Guides

Digital Output Boards

This SSR can be controlled either by using a high-power digital output (such as those on the OUT1100 - 4x Digital Output Phidget) or by using an open-collector digital output and a 5V source, which can be done with the 1012 - PhidgetInterfaceKit 0/16/16.

Product Board Properties
Part Number Price Controlled By
1012_3
PhidgetInterfaceKit 0/16/16
$95.00 USB (Mini-USB)
OUT1100_0
4x Digital Output Phidget
$15.00 VINT

Heatsinks

If you're switching high current devices or circuits, we recommend that you use a heatsink. In some applications, you may be able to mount the relay to a metal surface which can act as a heatsink by itself. This relay comes with a heat transfer pad that you can sandwich between the relay and the heatsink or mounting surface. When screwed on tight, it will eliminate any air gaps and ensure that the heat conducts from the relay to the heatsink. In cases where the heatsink cannot dissipate heat fast enough, you should add a fan to one end of the heatsink so that air is constantly moving through the fins.

Product Heatsink
Part Number Price Thermal Resistance
3955_0
Small Heatsink for SSR
$5.50 2.4 K/W
3961_0
Large Heatsink for SSR
$18.00

Product Specifications

Electrical Properties
Isolation Method Photoelectric
Dielectric Strength 2.5 kV AC
Control Voltage Min 3 V DC
Control Voltage Max 32 V DC
Load Voltage Min (DC) 5 V DC
Load Voltage Max (DC) 120 V DC
Load Current Max (DC) 75 A
Load Surge Current 225 A
Turn-on Time Max 2 ms
Turn-off Time Max 2 ms
Physical Properties
Length 57 mm
Width 43 mm
Height 25 mm
Operating Temperature Min -20 °C
Operating Temperature Max 80 °C
Other Properties
Manufacturer Part Number KG1075D
Customs Information
Canadian HS Export Code 8536.49.00
American HTS Import Code 8536.49.00.75
Country of Origin TW (Taiwan)

Documents

Here's a list of our DC solid state relays:

Product Electrical Properties
Part Number Price Control Voltage Min Control Voltage Max Load Voltage Min (DC) Load Voltage Max (DC)
3950_0
DC Solid State Relay - 30V 50A
$20.00 4 V DC 32 V DC 30 V DC
3951_0
DC Solid State Relay - 50V 80A
$25.00 4 V DC 32 V DC 50 V DC
3952_0
DC Solid State Relay - 30V 100A
$30.00 4 V DC 32 V DC 30 V DC
3958_0
DC Solid State Relay - 120V 75A
$45.00 3 V DC 32 V DC 5 V DC 120 V DC