• Works through 1/8 inch of glass of plastic
• Recognizes both contact and proximity; can be used as a slider or as an array of buttons
• Connects directly to a computer’s USB port

• Works through 1/8 inch of glass or plastic
• Recognizes both contact and proximity; can be used as a slide-wheel or as an array of buttons
• Plugs directly into a computer’s USB port

• Capacitive touch sensor that can detect a touch through plastic, glass, or paper.
• We recommend a material thickness of no more than 1/8”.
• The sensor is Ratiometric.

The 1110 has been replaced by the 1129 – Touch Sensor but is still included in the following kits: 2004, 2006, and 42001.

Please note that the 1129 has significant differences from the 1110. Please refer to the table below for more information.

• Capacitive touch sensor that can detect a touch through plastic, glass, or paper.
• We recommend a material thickness of up to 1/2”.
• The sensor can be attached to metallic objects to allow for a larger touch pad.
• Connects to any device with an Analog Input.