|3263_1 - 12V/3.0Kg-cm/78RPM 51:1 DC Gear Motor|
This DC motor has a 51:1 gearbox, a rated speed of 78 RPM and rated torque of 3.06 Kg·cm.
The 3263 is a 12 volt gear motor, generating 3.06 Kg-cm of torque at 78 RPM. This motor is quite compact considering the amout of power it can output.
The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.
This revision of the 3263 uses a slightly different motor with different specifications. Please refer to the spec table for more information.
The 3263 DC motor connects to either of the following controllers:
You'll need to solder wires to the contacts of the motor in order to connect it to a controller.
- 3263E - 12V/3.0Kg-cm/78RPM 51:1 DC Gear Motor w/ Encoder
- 3261 - 12V/0.2Kg-cm/1080RPM 3.7:1 DC Gear Motor
- 3262 - 12V/0.9Kg-cm/285RPM 14:1 DC Gear Motor
- 3264 - 12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor
The mounting holes on this motor are compatible with the 3337 - Mounting Bracket (NEMA11).
|Motor Type||DC Motor|
|Output Power (Mechanical)||2.9 W|
|Maximum Speed at Rated Voltage||78 RPM|
|Rated Torque||3.1 kg·cm|
|Stall Torque||18.2 kg·cm|
|Rated Voltage||12 V DC|
|Rated Current||410 mA|
|Stall Current||1.5 A|
|Shaft Diameter||6 mm|
|Recommended Wire Size (Motor)||20 - 25 AWG|
|Gear Ratio||50 801⁄895 : 1|
|Number of Gear Trains||3|
|Maximum Strength of Gears||30 kg·cm|
|Shaft Maximum Axial Load||35 N|
|Shaft Maximum Radial Load||25 N|