|1120_0 - FlexiForce Adapter|
The FlexiForce adapter allows you to connect one FlexiForce FSR to a Phidgets analog input.
The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad.
The FlexiForce sensor is an ultra-thin and flexible printed circuit, which can be easily integrated into most applications. With its paper-thin construction, flexibility and force measurement ability, the FlexiForce force sensor can measure force between almost any two surfaces and is durable enough to stand up to most environments.
FlexiForce has better force sensing properties, linearity, hysteresis, drift, and temperature sensitivity than any other thin-film force sensors.
The "active sensing area" is a 0.375” diameter circle at the end of the sensor.
|Sensor Output Type||Ratiometric|
|Supply Voltage Min||4.5 V DC|
|Supply Voltage Max||5.3 V DC|
|Current Consumption Min||2.6 mA|
|Current Consumption Max||3.2 mA|
|Current Consumption (Overload)||10.9 mA|
|Measurement Error Max||± 5 %|
|Recommended Wire Size||16 - 26 AWG|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||105 °C|
We offer the following FlexiForce Sensors:
- 3100 - FlexiForce Sensor 0-1 lb.
- 3101 - FlexiForce Sensor 0-25 lb.
- 3102 - FlexiForce Sensor 0-100 lb.
Before using your FlexiForce Sensor we recommend that you read the Flexiforce FAQs and User Manual paying special attention to Calibration and Conditioning.
- 3002 – 60cm Sensor Cable
- a FlexiForce Interface Cable
- two round plastic discs for the FlexiForce Sensor sensing pad