Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

Acrylic Enclosure for the 1012

ID: 3801_0

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Replaced by 3801_2

Replaced by the 3801_1 - Acrylic Enclosure for the 1012

The 3801 Enclosure is designed to protect the Rev 2 version of the 1012 – PhdgetInterfaceKit 0/16/16 while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

Note: The Phidget board is not included with the enclosure and must be purchased separately.


Package Includes

  • 6 clear acrylic pieces
  • Mounting Hardware (Nuts, bolts, spacers)

Required Tools

  • Small Phillips screwdriver

Product Specifications

Physical Properties
Fits Board Revision 2
Material Clear Acrylic
Thickness 3.2 mm
IP Rating 20
Customs Information
Canadian HS Export Code 8473.30.00
American HTS Import Code 8473.30.51.00
Country of Origin CN (China)

Warning


warning Be careful when tightening the mounting screws, as too much tension could crack the acrylic.