| 1064 - PhidgetMotorControl HC | $120.00 |
Product Features
- Control the velocity and acceleration of up to two high-current DC motors
- Requires an external 9 to 15VDC external power supply
- USB port is isolated from the motor control outputs
- Connects directly to a computer’s USB port.
Product Description
The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors.
Many variations of brushed DC motors exist: permanent magnet motors, electromagnet motors, coreless motors, linear motors... the PhidgetMotorController can be used with any of these, as well as other devices like small solenoids, incandescent light bulbs, and hydraulic or pneumatic devices like small pumps and valves.
Product Specifications
| Characteristic | Value |
|---|---|
| Output Controller Update Rate | 50 updates/second |
| Velocity Resolution | 1.5% |
| Acceleration Resolution | 1.5% Velocity/Second2 |
| Acceleration Limit (-100% to +100% velocity) | 120ms |
| PWM Frequency | 20kHz |
| Minimum Power Supply Voltage | 6VDC |
| Maximum Power Supply Voltage | 15VDC |
| Continuous Motor Current | 14A |
| Peak Motor Current - 60 seconds | 19A |
| Peak Motor Current - 10 seconds | 25A |
| Peak Motor Current - 2 seconds | 32 |
| Motor Overcurent Trigger on Load | < 100mΩ (50A typical) |
| Device Active Current Consumption | 100mA max |
Product Description
- Provides bi-directional control to 2 DC motors
- Requires external 6 to 15VDC Power Supply
- USB port is isolated from the motor control outputs
- Over voltage, over temperature, over current conditions are fed back to the API on the PC
Comes packaged with:
Resources
