Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

Optical Rotary Encoder ISC3004 - Discontinued

ID: 3530_0

This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.

Replaced by 3530_1

Replaced by the 3530_1 - Optical Rotary Encoder ISC3004, the same encoder but with a Phidget encoder cable connector.

This is a small ball bearing construction, rotary encoder without index that goes up to 3000 rpm.

The encoder comes with a 1 meter cable and 2 mounting screws.

Connection

This quadrature encoder can be read by an encoder interface. To attach the shaft of this encoder to a motor or some other device, you can use a shaft coupler. See the Connection & Compatibility tab for details.

Product Specifications

Encoder Properties
Output Circuit Type Push-Pull
Controlled By Encoder Interface
Encoder Resolution 360 CPR
Encoder Speed Max 3000 RPM
Electrical Properties
Supply Voltage Min 5 V DC
Supply Voltage Max 5 V DC
Output Frequency Max 80 kHz
Physical Properties
Shaft Diameter 4 mm
Shaft Maximum Axial Load 10 N
Shaft Maximum Radial Load 20 N
Operating Humidity Min 30 %RH
Operating Humidity Max (Non-condensing) 85 %RH
Operating Temperature Min -25 °C
Operating Temperature Max 85 °C
IP Rating IP54
Weight 83 g
Customs Information
Canadian HS Export Code 9029.10.00
American HTS Import Code 9029.10.80.00
Country of Origin CN (China)

Encoder Interfaces

This quadrature encoder must be read by an encoder interface. These interfaces will interpret the two quadrature signals in order to determine the continuous position of the rotating part. The following interfaces are compatible with this encoder:

Product Encoder Interface
Part Number Price Number of Encoder Inputs Count Rate Max
1047_1B
PhidgetEncoder HighSpeed 4-Input
$80.00 4 1E+06 pulses/s
1047_2B
PhidgetEncoder HighSpeed 4-Input
$75.00 4 1E+06 pulses/s
1057_2B
PhidgetEncoder HighSpeed
$55.00 1 2E+06 pulses/s
1057_3B
PhidgetEncoder HighSpeed
$50.00 1 1E+06 pulses/s
1065_1B
PhidgetMotorControl 1-Motor
$75.00 1 500000 cycles/s
DCC1000_0
DC Motor Phidget
$75.00 1 400000 pulses/s
DCC1002_0
4A DC Motor Phidget
$40.00 1 400000 pulses/s
ENC1001_0
Quadrature Encoder Phidget
$15.00 1 1E+06 pulses/s

Shaft Couplers

If you need to connect the main shaft of this motor to the shaft of another device, you can use a shaft coupler:

Product Physical Properties
Part Number Price Inner Diameter Material Coupling Rated Torque Coupling Rated Speed Torsional Stiffness
TRM4310_0
Jaw Coupling Half 4mm Series 12
$3.00 4 mm Aluminum 35.7 kg·cm 12000 RPM
TRM4332_0
Spiral Beam Coupling 4mm - 4mm
$3.50 4 mm Aluminium 10 kg·cm 8000 RPM 110 N·m/rad

Encoder Cables

Functional

The easiest way to connect your encoder to a Phidgets encoder interface is to use a Phidgets encoder cable, cut it to the desired length and solder the encoder wires to the encoder cable as follows:

3530 - Encoder 3019 - Phidget encoder cable
Red Red
Black Black
White White
Green Brown

Alternatively, you could buy the male connector (Molex part 50-57-9405), and crimp it onto the end of the cable, if you have the appropriate tools.

Product Physical Properties
Part Number Price Cable Length Cable Gauge
3019_0
HighSpeed Encoder Cable 50cm
$5.00 500 mm 26 AWG

Have a look at our quadrature encoders:

Product Encoder Properties
Part Number Price Output Circuit Type Encoder Resolution Encoder Speed Max
3530_1
Rotary Encoder with 4mm Shaft (360 CPR)
$50.00 Push-Pull 360 CPR 3000 RPM
3531_0
Rotary Encoder - For 4mm Motor Shaft 300 CPR
$25.00 Push-Pull 300 CPR 6000 RPM
3532_1
Rotary Encoder with 8mm Bore (500 CPR)
$50.00 Push-Pull 500 CPR 4500 RPM
ENC4109_0
Rotary Encoder - For 4mm Motor Shaft 40 CPR
$10.00 Push-Pull 40 CPR 6000 RPM
ENC4121_0
Rotary Encoder - 6mm Solid Shaft 600CPR
$25.00 Push-Pull 600 CPR 6000 RPM
ENC4122_0
Rotary Encoder - 6mm Solid Shaft 1000CPR with Index
$40.00 Push-Pull 1000 CPR 6000 RPM
ENC4123_0
Rotary Encoder - 8mm Solid Shaft 1000CPR with Index
$45.00 Push-Pull 1000 CPR 6000 RPM
ENC4124_0
Rotary Encoder - 12mm Solid Shaft 1000CPR with Index
$60.00 Push-Pull 1000 CPR 2000 RPM
ENC4126_0
Rotary Encoder - 12mm Hollow Shaft 1000CPR with Index
$50.00 Push-Pull 1000 CPR 6000 RPM
ENC4127_0
Rotary Encoder - For 5mm Motor Shaft 1000CPR
$30.00 Push-Pull 1000 CPR 5000 RPM