• Works through 1/8 inch of glass of plastic
• Recognizes both contact and proximity; can be used as a slider or as an array of buttons
• Connects directly to a computer’s USB port

• Works through 1/8 inch of glass or plastic
• Recognizes both contact and proximity; can be used as a slide-wheel or as an array of buttons
• Plugs directly into a computer’s USB port

• Provides Position, Velocity and Direction
• Position Accuracy of 2.5m CEP (best case)
• Battery Life (fully charged): 1 month
• Connects directly to a computer's USB Port

• 3-Axis, ± 8g Accelerometer
• No Calibration Necessary
• Inexpensive
• Connects directly to a computer's USB Port

• 3-Axis Compass, 3-Axis Gyroscope, 3-Axis Accelerometer
• Inexpensive
• Connects directly to a computer's USB Port

• 3-Axis, ± 8g Accelerometer
• No Calibration Necessary
• High Resolution measurements under ± 2g
• Connects directly to a computer's USB Port

• 3-Axis Compass, 3-Axis Gyroscope, 3-Axis Accelerometer
• High Resolution accelerometer measurements at < ± 2g
• High Resolution gyroscope measurements at < ± 400°/s (< ± 300°/s on the Z-Axis gyroscope)
• Connects directly to a computer's USB Port

• Infra Red thermometer for non-contact temperature measurements
• Thermometer is Factory calibrated
• Object temperature range of -70 to 380°C
• Connects directly to a computer's USB Port

• Interfaces to up to four Wheatstone Bridge based Sensors
• Supports variable data rates – from 1 to 125 samples/second
• Software configurable amplification
• Great interface for Load Cells, Strain Gauges
• Connects directly to a computer's USB Port

• Reads up to 4 encoders simultaneously
• Time Resolution of 1 μs
• Includes 4 Digital Inputs for detecting the state of switches and sensors
• Connects directly to a USB port on your PC

• Supports up to four J, K, E and T-type thermocouples
• Outputs temperature in degrees Celsius
• Uses terminal blocks to interface to inexpensive thermocouples with stripped leads
• Connects directly to a computer’s USB port

• Supports one J, K, E and T-type thermocouple
• Outputs temperature in degrees Celsius
• Uses terminal blocks to interface to inexpensive thermocouples with stripped leads
• Connects directly to a computer’s USB port

• Continuous rotation
• Returns 80 counts for 360 degrees of rotation
• Uses a two-bit mechanical encoder with a built-in momentary-action push-button switch
• Connects directly to a computer’s USB port

• Compass 3-Axis, Gyroscope 3-Axis, Accelerometer 3-Axis 5G
• Internally calibrated at the factory
• Rigorously tested to ensure "real life" data
• Connects directly to a computer's USB Port

20% off Clearance Sale

• Connects to any typical two-bit optical encoder.
• Returns up to 2,000,000 pulses per second.
• Can be used as an accurate human input device.
• Connects directly to a computer’s USB port.

• Designed to interface the Sharp distance sensors to an analog input on PhidgetInterface boards.
• Connects to any device with an Analog Input.

• Can detect an object at 5mm
• Can be used to determine the difference between low reflective conditions and high reflective conditions.
• Connects to any device with an Analog Input.

• Can detect the presence of an object at a distance of 0 to 10cm.
• Works just as well in both dim and well lit areas
• Does not depend on the reflective property of the object
• Connects to any device with an Analog Input.

• Measures the prescence of vibration on a surface.
• Connects to any device with an Analog Input.

• Intended as a user input device (i.e. recognizing that someone is pushing a button)
• Not accurate enough to be used as a weight measurement device.
• Connects to any device with an Analog Input.

• Uses the Linear Hall Effect.
• Provides a voltage output that is proportional to the applied magnetic field.
• Connects to any device with an Analog Input.

• Rotates 300 degrees
• Connects to any device with an Analog Input.

• Capacitive touch sensor that can detect a touch through plastic, glass, or paper.
• We recommend a material thickness of no more than 1/8”.
• The sensor is Ratiometric.

The 1110 has been replaced by the 1129 – Touch Sensor but is still included in the following kits: 2004, 2006, and 42001.

Please note that the 1129 has significant differences from the 1110. Please refer to the table below for more information.

• Detects changes in infrared radiation which occur when there is movement by a person (or object) which is different in temperature from the surroundings.
• Narrow sensing area.
• Connects to any device with an Analog Input.

• Linear potentiometer - the resistance varies linearly with the position of the slider.
• Can be used as human input or as position feedback in a system.
• Connects to any device with an Analog Input.

• Two-axis joystick with a momentary switch.
• Connects to any device with an Analog Input.

• Measures absolute gas pressure from 20 to 250 kPa (2.9 to 36.3 psi) with a maximum error of ±1.5%.
• Suitable for measuring vacuum or atmospheric pressure.
• Can be used as a crude barometer
• Connects to any device with an Analog Input.

• Measures 3600 degrees of rotation - 10 full turns.
• Typically used in Human Interface Applications such as control panels.
• Connects to any device with an Analog Input.

• Allows easy interfacing with a Tekscan FlexiForce Force Sensor: 0-1lbs, 0-25 lbs, and 0-100lbs.
• Connects to any device with an Analog Input.

• Provides an interface to non-Phidgets resistance sensors.
• Eliminates the need to connect a resistor to an analog input.
• Convenient terminal block.
• Connects to any device with an Analog Input.

• Measures alternating current up to 30Amps and direct current from -30Amps to +30Amps.
• Dual outputs allow the user to measure both the AC and DC components of complex current waveforms separately.
• Connects to any device with an Analog Input.

• Measures ambient temperatures from -30°C to +80°C
• Typical error: ±0.5°C
• Connects to any device with an Analog Input.

• Measures Relative Humidity from 10% to 95%
• Operates over 0% to 100% Relative Humidity
• Accurately measures ambient temperatures from -30°C to +80°C (-22°F to 176°F) with a typical error of ±0.75 degrees Celsius in the 0°C to 100°C range
• Connects to any device with an Analog Input.

• Measures the pressure difference between two pressure intakes
• Measures both negative and positive pressures
• Pressure range: -3.6 psi (-25 kPa) to +3.6 psi (+25kPa)
• Connects to any device with an Analog Input.

• Detects objects from 0 inches to 254 inches (6.45 meters) with 1 inch (25.4 mm) resolution.
• Automatic calibration when powered up
• Operates between 2.5V to 5.5V
• Connects to any device with an Analog Input.

• Capacitive touch sensor that can detect a touch through plastic, glass, or paper.
• We recommend a material thickness of up to 1/2”.
• The sensor can be attached to metallic objects to allow for a larger touch pad.
• Connects to any device with an Analog Input.

• Interfaces to a glass electrode through a common BNC connection
• Measures the pH or ORP level of a substance
• Connects to any device with an Analog Input.

• Measures forces up to 2kg
• Thin, non-intrusive sensor
• Connects to any device with an Analog Input.

• Measures sound pressure level (SPL) between 50db to 100dB
• Frequency range of 100Hz to 8kHz
• Can be used to detect sounds, and approximate how loud the sound is
• Connects to any device with an Analog Input.

Approximate arrival date of new stock: Oct. 15, 2013

• Measures voltage from -30V to +30V DC
• Typical Error: ±0.7%
• Connects to any device with an Analog Input.

• Measures pressure difference between two ports
• Measures both negative and positive pressures
• Pressure range: -0.3 psi (-2 kPa) to +0.3 psi (+2 kPa)
• Connects to any device with an Analog Input.

• Measures pressure difference between two ports
• Measures both negative and positive pressures
• Pressure range: -1 psi (-7 kPa) to +1 psi (+7 kPa)
• Connects to any device with an Analog Input.

• Measures pressure difference between two ports
• Pressure range: 0 to +7.3 psi (+50 kPa)
• Connects to any device with an Analog Input.

• Measures pressure difference between two ports
• Pressure range: 0 to +14.5 psi (+100 kPa)
• Connects to any device with an Analog Input.

• Measures absolute pressure of the environment
• Pressure range: +2.9 (+20 kPa) to +58 psi (+400 kPa)
• Connects to any device with an Analog Input.

• Measures absolute pressure of the environment
• Pressure range: +2.2 (+15 kPa) to +16.7 psi (+115 kPa)
• Connects to any device with an Analog Input.

• Measures up to 1000 lux
• Measures both incandescent and fluorescent light
• Indivudually calibrated for maximum accuracy
• Connects to any device with an Analog Input.

• Measures up to 70 kilolux
• Measures both incandescent and fluorescent light
• Indivudually calibrated for maximum accuracy
• Connects to any device with an Analog Input.

• Detects an opaque object at up to 4mm away
• Can be used to determine the difference between low reflective conditions and high reflective conditions
• Connects to any device with an Analog Input.

• 8" ultra-thin force sensor
• Versatile, easy to integrate, and cost effective.
• Pliable enough to allow for non-intrusive measurement.
• Can be attached to many surfaces and can be combined with plastic or metal films for increased stiffness or for added protection from abrasion.

• 8" ultra-thin force sensor
• Versatile, easy to integrate, and cost effective.
• Pliable enough to allow for non-intrusive measurement.
• Can be attached to many surfaces and can be combined with plastic or metal films for increased stiffness or for added protection from abrasion.

• 8" ultra-thin force sensor
• Versatile, easy to integrate, and cost effective.
• Pliable enough to allow for non-intrusive measurement.
• Can be attached to many surfaces and can be combined with plastic or metal films for increased stiffness or for added protection from abrasion.

• Optimized for use in human touch control applications
• Maintenance-free
• Robust design tested to over 10 million actuations
• Convenient solder tabs for the connection

• Optimized for use in human touch control applications
• Maintenance-free
• Robust design tested to over 10 million actuations
• Convenient solder tabs for the connection

• Optimized for use in human touch control applications
• Maintenance-free
• Robust design tested to over 10 million actuations
• Convenient solder tabs for the connection

• Adapter for the Omega K-Type Miniature Male Connector Thermocouples.

• Measures temperatures between -50°C to +200°C
• 1 meter long wire
• 6mm stripped wire for inserting in terminal blocks

• Can take continuous temperature readings between -50°C to +800°C
• Can take a single temperature reading between -100°C to +900°C
• Wire length: 70cm extendable to 170cm
• Removable Miniature Male Connector

• Measures Instant temperatures between -50°C to +450°C
• Length: 1 meter
• 6mm stripped wire for inserting in terminal blocks
• Fiberglass insulation

• Measures Instant temperatures between -50°C to +785°C
• Length: 1 meter
• 6mm stripped wire for inserting in terminal blocks
• Fiberglass Insulation

• Range: 0 - 10 lbs
• Small Size, Low Noise
• Essentially Unlimited Cycle Life Expectancy
• Fast Response Time
• Connects to any device with an Analog Input.

• Range: 0 - 25 lbs
• Small Size, Low Noise
• Essentially Unlimited Cycle Life Expectancy
• Fast Response Time
• Connects to any device with an Analog Input.

• Range: 0 - 50 lbs
• Small Size, Low Noise
• Essentially Unlimited Cycle Life Expectancy
• Fast Response Time
• Connects to any device with an Analog Input.

• Range: 0 - 100 lbs
• Small Size, Low Noise
• Essentially Unlimited Cycle Life Expectancy
• Fast Response Time
• Connects to any device with an Analog Input.

• Accurate Range: 10 – 95% RH
• Small Size
• Not affected by water immersion
• Fast Response Time
• Connects to any device with an Analog Input.

• Maximum Weight: 780g
• Wheatstone Bridge Sensor
• Measures shear force
• Small: 45 x 9.3 x 6mm
• Plugs into the 1046 – PhidgetBridge 4-Input

• Maximum Load Capacity: 5 kg
• Wheatstone Bridge Sensor
• Measures shear force
• Small: 55.25 x 12.7 x 12.7mm
• Plugs into the 1046 – PhidgetBridge 4-Input

• Maximum Load Capacity: 20 kg
• Wheatstone Bridge Sensor
• Measures shear force
• Small: 55.25 x 12.7 x 12.7mm
• Plugs into the 1046 – PhidgetBridge 4-Input

• Maximum Load Capacity: 50 kg
• Wheatstone Bridge Sensor
• Measures shear force
• Small: 55.25 x 12.7 x 12.7mm
• Plugs into the 1046 – PhidgetBridge 4-Input

• Maximum Weight: 50 kg
• Wheatstone Bridge Sensor
• Measures compressive force
• Plugs into the 1046 – PhidgetBridge 4-Input

• Maximum Load Capacity: 200 kg
• Wheatstone Bridge Sensor
• Measures compressive force
• Plugs into the 1046 – PhidgetBridge 4-Input

• Maximum Load Capacity: 100 kg
• Wheatstone Bridge Sensor
• Individually calibrated at the factory
• Measures compressive or tensile force
• Plugs into the 1046 – PhidgetBridge 4-Input

• Used to interface Platinum RTDs to 1046 – PhidgetBridge
• Worst case error: 0.1% (0.5°C)

• Economical method to monitor any AC electrical load
• Built-in Current transducer
• Wire Window accommodates up to AWG #2
• Calibrated for 0-10A AC
• Connects to any device with an Analog Input.

• Economical method to monitor any AC electrical load
• Built-in Current transducer
• Wire Window accommodates up to AWG #2
• Calibrated for 0-25A AC
• Connects to any device with an Analog Input.

• Economical method to monitor any AC electrical load
• Built-in Current transducer
• Wire Window accommodates up to AWG #2
• Calibrated for 0-50A AC
• Connects to any device with an Analog Input.

• Economical method to monitor any AC electrical load
• Built-in Current transducer
• Wire Window accommodates up to AWG #2
• Calibrated for 0-100A AC
• Connects to any device with an Analog Input.

• Low turn on (less than 0.150A)
• Hysteresis and anti-transient circuitry eliminates chatter and false switching
• Wire Window: 13.7mm (0.540")
• Easy Wiring
• Connects to any device with a Digital Input.

• Measures line voltage on mains up to 250Vrms
• Operates at 50Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures line voltage on mains up to 250Vrms
• Operates at 60Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures DC voltage up to 200VDC
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures DC voltage up to 75VDC
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures DC Current up to 10mA
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures DC Current up to 100mA
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures DC Current up to 1A
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures AC Active Power up to a maximum of 7500W
• Operates at 50Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures AC Active Power up to a maximum of 7500W
• Operates at 60Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures AC Active Power up to a maximum of 1250W
• Operates at 50Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures AC Active Power up to a maximum of 1250W
• Operates at 60Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures AC Active Power up to a maximum of 550W
• Operates at 60Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures AC Active Power up to a maximum of 1650W
• Operates at 60Hz
• 0.5% Accuracy
• Isolation Voltage of 2500VDC
• DIN Rail mountable
• Connects to any device with an Analog Input.

• Measures distances from 4 cm to 30 cm
• Infrared Proximity Sensor
• Analog output inversely proportional to distance

• Measures distances from 10 cm to 80 cm
• Infrared Proximity Sensor
• Analog output inversely proportional to distance

• Measures distances from 20 cm to 150 cm
• Infrared Proximity Sensor
• Analog output inversely proportional to distance

• Detects Metal, nonmetal materials (liquid, powder and granular materials)
• Standard Detecting Distance: 8mm
• Normally Open
• DC wire output
• Requires a 12 to 30VDC Power Supply
• Connects to any device with a Digital Input.

• Detects Metal, nonmetal, liquid, powder and granular materials
• Standard Detecting Distance: 15mm
• Normally Open
• DC wire output
• Requires a 12 to 30VDC Power Supply
• Connects to any device with a Digital Input.

• Through Beam Emitter and Receiver using an Infrared LED
• Standard Detecting Distance: 10m
• NPN, Normally Open (NO) Output
• PVC Cable 2m
• Requires a 12 to 30VDC Power Supply
• Connects to any device with a Digital Input.

• Detects Metallic objects
• Standard Detecting Distance: 4mm
• Normally Open
• DC wire output
• Requires a 12 to 24VDC Power Supply
• Connects to any device with a Digital Input.

• Detects Metallic objects
• Standard Detecting Distance: 15mm
• Normally Open
• DC wire output
• Requires a 12 to 24VDC Power Supply
• Connects to any device with a Digital Input.

• Detects metallic objects
• Standard Detecting Distance: 5mm
• NPN Normally Open output
• Requires a 6 to 36VDC Power Supply
• Connects to any device with a Digital Input.

• Ball Bearing construction
• Maximum 3000rpm
• No Index
• 1 meter cable

• General Purpose Combination electrode
• No need to refill the KCL solution
• pH range: 0-14
• Operating Temperature: 0-80°C

• General Industrial Combination electrode
• No need to refill the KCL solution
• Teflon Diaphragm
• PPS strong molded body
• pH range: 0-14
• Temperature: 0-110°C

• General Purpose Combination electrode
• No need to refill the KCL solution
• Measurement range: ±1500mV
• Temperature: 0-80°C
• Clear Plastic outer shell

• General Industrial Combination electrode
• No need to refill the KCL solution
• Teflon Diaphragm
• PPS strong molded body
• Measurement range: ±1500mV
• Temperature: 0-110°C

• Flush or countersink installation
• Wide Gap, up to 3/4 inch
• 45cm (18") white 22AWG cable
• Comes with a 1/2" rare earth magnet
• Connects to any device with a Digital Input.

• Roll Plunger
• 3/4" diameter
• 45cm (18") white 22AWG cable
• Comes with a spacer and two screws
• Connects to any device with a Digital Input.

• Designed to be Surface mounted
• Closed Gap: 12mm
• 45cm (18") white 22AWG cable
• Comes with a miniature magnet
• Connects to any device with a Digital Input.

• Single-pole, Double throw (SPDT)
• Can be used as a limit switch or tactile input
• Switches up to 5A at 125V DC or 250V AC
• Connects to any device with a Digital Input.

• Single-pole, Double throw (SPDT)
• Can be used as a limit switch or tactile input
• Switches up to 5A at 125V DC or 250V AC
• Connects to any device with a Digital Input.

• Provides position feedback for linear moving parts
• 75mm of travel
• Industrial form factor
• Can be connected to any device with an analog input

• Provides position feedback for linear moving parts
• 100mm of travel
• Industrial form factor
• Can be connected to any device with an analog input

• Provides position feedback for linear moving parts
• 200mm of travel
• Industrial form factor
• Can be connected to any device with an analog input

• Provides position feedback for linear moving parts
• 300mm of travel
• Industrial form factor
• Can be connected to any device with an analog input

• Provides position feedback for rotary moving parts
• 345° of electrical travel
• Industrial form factor
• Can be connected to any device with an analog input

• A small assortment of sensors
• Great for experimenting and learning
• Take advantage of the analog ports on your PhidgetInterfaceKit 8/8/8

• A good assortment of sensors
• Great for experimenting and learning
• Take advantage of the analog ports on your PhidgetInterfaceKit 8/8/8